Providing Conduit - HP M2350A Service Manual

Preparing the Site
Site Preparation Responsibilities
Warning It is the customer's responsibility to have the attachment of the mounting
hardware to the ceiling, wall, or mounting rail and the construction of
the ceiling, wall, or mounting rail evaluated for structural integrity
and compliance with all local, state and any other required codes by a
registered, professional, structural and/or mechanical engineer.
Although considerable effort has been made to ensure the safety of
the ceiling mount installation and or mounting guidelines, it is to be
understood that the installation itself is beyond the control of BP.
Accordingly, EIP will not be responsible for the failure of any such
installation.
Providing Conduit
Where a remote installation is required, the customer is responsible for the following hardware
installations:
n
Providing conduit and/or trunking of a sufficient cross- sectional area for the planned cables
and possible future expansion (for additional components or systems),
n
Providing and/or installing suitable wall boxes to accommodate the faceplates.
Warning
NEVER run power cables through the same conduit or trunking used for
HP Component CentraJ Monitor cables.
5-3