Installing
the System
Connecting Peripherals
b. Connection Using the Printer Spooler
Important
Printer configuration will differ depending upon which connection method
!iil
you choose. See the Co?@gWng pn'nters section of this chapter for more
information.
'lb Connect a Printer
Directly
to Computer
Module
1. Connect one end of the printer cable to the top RS-232 connector
on
the rear of the
computer module.
2. Connect the other end
of
the printer cable to the RS-232 interface on the rear of the printer.
3. Connect the printer power cord from the ac connector at rear of printer to main power.
'25 PIN SERIAL
CONNECTOR
B
w
u
PRlNT
M23OCQO3.GAL
9 PIN SERIAL
CONNECTOR
m
ZL
HPC2809A
SERIAL
77
CABLE
ADAPTER
PRINT
PARALLEL
CONNECTOR
I
HP5962-4340
CONVERTER
SERIAL TO PARALLEL
Figure 7-9. Example of Direct Printer
Connection to Computer Module
7-25