HP M2350A Service Manual page 309

Removing and Replacing Components
Servicing the Computer Module
'lb Remove the Top Cover
The procedure for removing the top cover is described in the following steps.
Step 1
Using the cross-tipped screwdriver, remove the six screws (three on each side)
securing the top cover to the computer module.
Step 2
Lift the top cover clear of the computer module.
'lb Replace the Top Cover
The procedure for replacing the top cover is described in the following steps.
Step 1'
Locate the top cover on to the computer module.
Step 2
Using the cross-tipped screwdriver, replace the 6 screws (three each side) and
tighten.
12-37