HP M2350A Service Manual page 160

Mounting the Components
Installing Options 001, 002, 007, 008
Figure 6-15. Attaching Top Cover Stack Mount Bracket to Plastic Cover
4. Refer to Figure 6-16 and attach joiner brackets to the top cover stack mount bracket flanges:
a. Secure one joiner bracket to righthand stack mount bracket flange with M4 screw.
b. Secure the other joiner bracket to lefthand stack mount bracket flange with M4 screw.
Figure 6-16. Attaching Joiner Brackets to Top Cover Stack Mount Bracket Flanges
5. Refer to Figure 6-17 and attach stack mount platform to the joiner brackets and the plastic
cover:
a. Slide stack mount platform onto plastic cover, inserting its 4 tabs into the cover's front
ventilation slots.
b. Align holes in rear off platform with PEM nuts in joiner brackets.
6-16