Removing The Center-Mounting Brackets - Juniper MX2010 Hardware Manual

Removing the Center-Mounting Brackets

The center-mounting brackets are not used for a four-post rack, and must be removed from the chassis.
To remove the center-mounting brackets from the chassis:
1. Loosen the screws from each bracket (see
2. Remove each bracket.
Figure 84: Center-Mounting Bracket Removal
SEE ALSO
Installing the Center-Mounting Brackets
RELATED DOCUMENTATION
MX2010 Rack-Mounting Hardware | 43
MX2010 Rack Requirements | 135
Figure 84 on page 237).
237