Securing the MX2010 Router to the Router Transport Platform
To secure the router to the router transport platform:
1. Ensure that the rack is in its permanent location and is secured to the building. Ensure that the installation
site allows adequate clearance for router transport kit turn ratios, airflow, and maintenance.
2. Using the shipping crate door as a ramp, secure the door to the crate platform by using the two metal
latches (see
Figure 102 on page
Figure 102: Securing the Crate Door to the Shipping Crate Platform
NOTE:
An empty MX2010 weighs approximately 324 lb (146.96 kg).
3. Using a two-person team on either side of the chassis, turn the handles on the router transport four
or five times until the chassis is raised approximately 1 in. (2.54 cm), making sure that the chassis is
level.
261).
261