Maintaining The Mx2010 Air Filters; Maintaining The Mx2010 Air Baffle - Juniper MX2010 Hardware Manual

Maintaining the MX2010 Air Filters

Purpose
For optimum cooling, verify the condition of the air filters.
Action
On a regular basis:
Check the air filters for dust and debris. Replace the filter elements. The filter elements degrade over
time, so the filter elements in use, as well as spares, must be replaced every 6 months.
CAUTION:
the fans are very powerful, they could pull small bits of wire or other materials
into the router through the unfiltered air intake. This could damage the router
components.
The shelf life of polyurethane filter varies from two years to five years depending on the storage
conditions. Store in a cool, dry, and dark environment. Wrap the media in plastic and store in an
environment with relative humidity between 40%- 80% and temperature between 40°F (4° C) to 90°F
(32° C). Note that if the material flakes, or becomes brittle when rubbed or deformed, it is no longer
usable.
SEE ALSO
Tools and Parts Required to Maintain the MX2010 Hardware Components | 218
MX2010 Router Hardware Components and CLI Terminology | 25
MX2010 Cooling System Description | 45
Replacing the MX2010 Air Filters | 449
Installing the MX2010 Air Filter | 361

Maintaining the MX2010 Air Baffle

Purpose
For optimum cooling, verify the condition of the air baffle (see
NOTE: The air baffle is optional.
Always keep the air filter in place while the router is operating. Because
Figure 320 on page 615).
614