Installing The Mx2010 Extended Emi Cover - Juniper MX2010 Hardware Manual

Figure 262: Removing the Extended EMI Cover Mounting Brackets
Figure 263: Removing the Extended EMI Card-Cage Cover

Installing the MX2010 Extended EMI Cover

The extended electromagnetic interference (EMI) covers attaches to the router over the card cage.
1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to
one of the ESD points on the chassis.
2. On each side of the card cage, orient the extended EMI cover's mounting brackets so that they line up
with the mounting holes. The groove that holds the points on the cover should be at the top.
506