Tools And Parts Required For Mx2010 Router Connections - Juniper MX2010 Hardware Manual

Tools and Parts Required for MX2010 Router Connections

To connect the router to management devices and MPCs, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
RELATED DOCUMENTATION
Connecting the MX2010 Router to a Network for Out-of-Band Management | 337
Connecting an MX2000 Router to a Console or Auxiliary Device | 338
Connecting an MX2010 Router to an External Alarm-Reporting Device | 340
220