Juniper MX2010 Hardware Manual page 68

Figure 16: MX2010 Lower Extended Cable Manager
LC 10 11 12 13 14 15 16
The extended DC cable manager provides additional support to route and secure a large number of cables
away from the rear of the PDMs.
You can use cable strips or other ties to gently secure the cables in the upper and lower extended cable
managers. To secure the cables in place, loop the tie through the cable anchor and secure the tie.
RELATED DOCUMENTATION
Installing the MX2010 Standard Cable Manager | 388
Installing the MX2010 Standard DC Cable Manager | 368
Replacing the MX2010 Standard Cable Managers | 459
17 18 19
42