Juniper MX2010 Hardware Manual page 252

Table 78: Mounting Hole Locations for Installing the Four-Post Mounting Shelf (continued)
Hole Distance Above U Division
3 1.50 in. (3.8 cm)
2 0.88 in. (2.2 cm)
1 0.25 in. (0.6 cm)
Table 79: Mounting Hole Locations for Installing a MX2010 Chassis in a Four-Post Rack or Cabinet
Hole Distance Above U Division
110 63.88 in. (162.2 cm)
101 58.63 in. (148.9 cm)
92 53.38 in. (135.6 cm)
83 48.13 in. (122.2 cm)
74 42.88 in. (108.9 cm)
65 37.63 in. (95.6 cm)
56 32.38 in. (82.2 cm)
47 27.13 in. (68.9 cm)
38 21.88 in. (55.6 cm)
29 16.63 in. (42.2 cm)
20 11.38 in. (28.9 cm)
11 6.13 in. (15.6 cm)
The holes in the front-mounting flanges are spaced at 3 U (5.25 in. (13.3 cm).
SEE ALSO
Verifying the MX2010 Parts Received | 226
0.86 U
0.50 U
0.14 U
36.50 U
33.50 U
30.50 U
27.50 U
24.50 U
21.50 U
18.50 U
15.50 U
12.50 U
9.50 U
6.50 U
3.50 U
234