Reinstalling Components In The Mx2010 Router After Initially Installing The Router In A Rack - Juniper MX2010 Hardware Manual

RELATED DOCUMENTATION
MX2010 Rack Requirements | 135
MX2010 Router Transport Kit Moving Requirements and Guidelines | 138
Installing an MX2010 Router Using a Router Transport Kit Overview | 258
Grounding an MX2000 Router | 289
Reinstalling Components in the MX2010 Router After Initially Installing
the Router in a Rack
After the router is installed in the rack, remove the shipping covers, and reinstall the removed components
before booting and configuring the router. You reinstall components first in the rear of the chassis, and
then in the front:
Reinstalling the Power Distribution Modules | 276
1.
Reinstalling the Power Supply Modules | 279
2.
Reinstalling the Fan Trays | 281
3.
Reinstalling the SFBs | 283
4.
Reinstalling the Adapter Card | 284
5.
Reinstalling the MPCs | 285
6.
Reinstalling the CB-REs | 286
7.
275