Mx2010 Router Overview - Juniper MX2010 Hardware Manual

Universal routing platform

Hide thumbs Also See for MX2010:

Table of Contents

MX2010 Router Overview

IN THIS CHAPTER

MX2010 Router Overview | 3

MX2010 Router Overview

The MX2010 Universal Routing Platform is an Ethernet-optimized router that provides both switching

and carrier-class Ethernet routing. The MX2010 router supports service provider core, converged core

and edge, and edge applications, and enables a wide range of business and residential and services, including

high-speed transport and VPN services, next-generation broadband multiplay services, and high-volume

Internet data center internetworking.

The MX2010 chassis provides redundancy and resiliency. All major hardware components including the

power system, the cooling system, the Control Board and the switch fabrics are fully redundant.

The MX2010 router is 34 rack units (U) tall. One router can be installed in an open-frame rack, four-post

rack, or cabinet. The MX2010 router has 10 dedicated line-card slots which means a maximum of 10

Modular Port Concentrators (MPCs) including adapter cards (ADCs), and Modular Interface Cards (MICs),

a host subsystem consisting of 2 Control Board with Routing Engines (CB-REs), and 8 Switch Fabric Boards

Up to 2 MICs can be installed in each MPC. Fully populated, the MX2010 router supports up to 20 MICs.

For a list of the supported MPCs, and MICs, see the

Table of Contents