Installing The Router; Removing Components From The Mx2010 Router Chassis Before Installing It In A Rack - Juniper MX2010 Hardware Manual

CHAPTER 17

Installing the Router

IN THIS CHAPTER

Removing Components from the MX2010 Router Chassis Before Installing It in a Rack | 239

Installing an MX2010 Router Using a Pallet Jack Overview | 251
Installing the Pallet Jack Attachment | 252
Installing the MX2010 Router Using a Pallet Jack with Attachment | 253
Installing an MX2010 Router Using a Router Transport Kit Overview | 258
Installing the Router Transport Kit on the MX2010 Router | 258
Securing the MX2010 Router to the Router Transport Platform | 261
Using the Router Transport Kit to Install the MX2010 Router in a Four-Post Rack | 263
Using the Router Transport Kit to Install the MX2010 Router in an Open-Frame Rack | 270
Reinstalling Components in the MX2010 Router After Initially Installing the Router in a Rack | 275
Removing Components from the MX2010 Router Chassis Before Installing
It in a Rack
Before installing the router with a pallet jack, you must first remove shipping covers and components from
the chassis. With components removed, the chassis weighs approximately 324 lb (146.96 kg).
CAUTION:
to any other part of the chassis can cause damage.
Removing the Power Distribution Modules Before Installing an MX2010 Router | 240
1.
Removing the Power Supply Modules Before Installing an MX2010 Router | 243
2.
Removing the Fan Trays Before Installing an MX2010 Router | 245
3.
Removing the SFBs Before Installing an MX2010 Router | 247
4.
Removing the MPCs and Adapter Card Before Installing an MX2010 Router | 248
5.
The shipping covers help guide the chassis into the rack. Applying force
239