Mpc Components; Mx2010 Modular Port Concentrator Leds | 73 - Juniper MX2010 Hardware Manual

Figure 29: MPC Installed in the MX2010 Router

MPC Components

Each MPC consists of the following components:
MIC card carrier, which includes two MIC slots (excludes the fixed configuration MPC).
Fabric interfaces.
Two Gigabit Ethernet interfaces that allow control information, route information, and statistics to be
sent between the Routing Engine and the CPU on the MPCs.
Up to four Junos Trio chipsets, which perform control functions tailored to the MPC's media type.
Backplane connectors and power circuitry.
Online button located on the craft interface, which takes the MPC online or offline when pressed.
OK/FAIL LED on the MPC faceplate. For more information about LEDs on the MPC faceplate, see the
MX Series Interface Module
RELATED DOCUMENTATION

MX2010 Modular Port Concentrator LEDs | 73

MX2010 Field-Replaceable Units | 17
Maintaining MX2010 MPCs | 653
Troubleshooting the MX2010 MPCs | 726
Replacing an MX2010 MPC and Adapter Card | 525
Reference.
72