Installation Overview; Installing An Mx2010 Router Overview - Juniper MX2010 Hardware Manual

CHAPTER 14

Installation Overview

IN THIS CHAPTER

Installing an MX2010 Router Overview | 215

Tools and Parts Required to Unpack the MX2010 Router | 217
Tools Required to Install the MX2010 Router Using a Pallet Jack | 217
Tools Required to Install the MX2010 Router Using a Router Transport Kit | 218
Tools and Parts Required to Maintain the MX2010 Hardware Components | 218
Tools and Parts Required for Connecting an MX2000 Router to Power | 219
Tools and Parts Required for MX2010 Router Connections | 220
Installing an MX2010 Router Overview
To install the MX2010 router:
1. Prepare your installation site. See:
Overview of Preparing the Site for the MX2010 Router on page 125
2. Review the safety guidelines. See:
General Safety Guidelines for Juniper Networks Devices
3. Unpack the router and verify the parts. See:
Unpacking the MX2010 Router on page 222
Verifying the MX2010 Parts Received on page 226
Unpacking the MX2010 Router Transport Kit on page 228
4. Install the mounting hardware. See:
Installing the MX2010 Mounting Hardware for a Four-Post Rack or Cabinet on page 233
5. Remove all components. See:
Removing Components from the MX2010 Router Chassis Before Installing It in a Rack on page 239
6. Install the router into the rack. See:
215