Mx2000 Seven-Feed Single-Phase Ac Power Distribution Module Description - Juniper MX2010 Hardware Manual

MX2010 Power System Description | 95
MX2020 Power Subsystem Description
Maintaining the Power Supply Modules on the MX2000 Line of Routers | 666
Troubleshooting the MX2000 Router Power System | 320
MX2020 AC Power Requirements
MX2010 AC Power Requirements | 161
MX2000 AC Power Cord Specifications | 170
MX2000 Seven-Feed Single-Phase AC Power Distribution Module
Description
Each seven-feed single-phase AC power distribution module (PDM) weighs approximately 8 lb (3.6 kg).
The front of the PDM has seven type C21 power cord connections for connecting to single-phase AC
power. Figure 38 on page 105
Figure 38: Seven-Feed Single-Phase AC Power Distribution Module
CAUTION:
before connecting the input power cables. If the PDM must be removed, all input
power cables must be removed from the PDM before the PDM can be removed from
the chassis.
RELATED DOCUMENTATION
MX2000 AC Power System Electrical Specifications | 173
MX2000 AC Power Cord Specifications | 170
MX2000 Single-Phase AC Power Distribution Module Electrical Specifications | 180
Maintaining the Power Supply Modules on the MX2000 Line of Routers | 666
shows the seven-feed single-phase AC PDM.
The single-phase AC PDM must be installed and secured in the chassis
105