Tools And Parts Required To Unpack The Mx2010 Router; Tools Required To Install The Mx2010 Router Using A Pallet Jack - Juniper MX2010 Hardware Manual

Tools and Parts Required to Unpack the MX2010 Router

To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 1, 2, and 3
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
Blank panels to cover any slots not occupied by a component
RELATED DOCUMENTATION
Unpacking the MX2010 Router | 222
Unpacking the MX2010 Router Transport Kit | 228
Verifying the MX2010 Parts Received | 226
MX2010 Router Overview | 3

Tools Required to Install the MX2010 Router Using a Pallet Jack

To install the router, you need the following tools and equipment:
Standard pallet jack (not provided)
Pallet jack attachment—MX2000-PLLT-JCK-ADPTR
Front component shipping covers
Rear component shipping covers
Phillips (+) screwdrivers, numbers 1, 2, and 3
9/16-in. or 14-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
ESD wrist strap
Antistatic mat
RELATED DOCUMENTATION
Overview of Preparing the Site for the MX2010 Router | 125
Removing Components from the MX2010 Router Chassis Before Installing It in a Rack | 239
Installing the MX2010 Router Using a Pallet Jack with Attachment | 253
217