Table of Contents
Advertisement
Figure 118: Reinstalling a DC Power Supply Module (240 V China)
Reinstalling the Fan Trays
To reinstall the upper or lower fan trays, (see
1. Loosen the two captive screws on each side of the fan tray access panel, and open the panel.
2. Take each fan tray to be installed out of its electrostatic bag, and identify the slot on the fan tray where
it will be connected.
3. While grasping the handle, place one hand under the fan tray for support, and align it into the slot.
4. Press and hold the latch while guiding the fan tray half way in until it stops.
NOTE:
The fan tray has a safety mechanism so that the fan tray cannot be removed in
one motion.
Figure 119 on page 282
and
Figure 120 on page
281
282):
- Quick Links:
- Mx2010 Chassis Description
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
