Installing An Mx2010 Router Using A Pallet Jack Overview - Juniper MX2010 Hardware Manual

CAUTION:
each component on an antistatic mat resting on a stable, flat surface.
Figure 95: Removing a CB-RE
RELATED DOCUMENTATION
Preventing Electrostatic Discharge Damage to an MX Series Router
Overview of Preparing the Site for the MX2010 Router | 125
Reinstalling Components in the MX2010 Router After Initially Installing the Router in a Rack | 275

Installing an MX2010 Router Using a Pallet Jack Overview

1. Gather the tools required to install the router. See:
Tools Required to Install the MX2010 Router Using a Pallet Jack on page 217
2. Install the pallet jack attachment. See:
Installing the Pallet Jack Attachment on page 252
Do not stack CB-REs on one another after you remove them. Place
251