Mx2010 Fan Tray Led - Juniper MX2010 Hardware Manual

WARNING:
completely.
WARNING:
latch until the STATUS LED turns off. Continue to press and hold the latch while
removing the fan trays.
Figure 20: Lower Fan Tray Air Filter
The air baffle is an optional component that can be purchased from Juniper Networks.
When installed over the upper fan tray access door, the air baffle dissipates exhausted air away from the
router.
RELATED DOCUMENTATION
Troubleshooting the MX2010 Cooling System | 706
Maintaining the MX2010 Air Filters | 609
Maintaining the MX2010 Fan Trays | 615
Maintaining the MX2010 Air Baffle | 614

MX2010 Fan Tray LED

Each fan tray (both the standard fan tray and optimized power fan tray) contains one bicolor LED located
on the front faceplate (see
middle of the craft interface. For more information, see
on page 31.
Before removing a fan tray, make sure that the fan blades have stopped
The fan trays use a double latch safety mechanism. Press and hold the
Table 18 on page 49). A set of four bicolor fan tray LEDs is located on the top
"MX2010 Component LEDs on the Craft Interface"
48