Maintaining The Mx2010 Adapter Cards - Juniper MX2010 Hardware Manual

Maintaining the MX2010 Adapter Cards

Purpose
For optimum router performance, verify the condition of the adapter cards. The router can have up to ten
adapter cards mounted vertically in the line-card cage at the front of the chassis. The MPCs are installed
vertically into the adapter cards.
Action
On a regular basis:
Issue the CLI show chassis adc command to check the status of installed adapter cards. As shown in the
sample output, the value Online in the column labeled State indicates that the adapter card is functioning
normally:
user@host> show chassis adc
Slot State
0 Online 4 hours, 7 minutes, 42 seconds
1 Online 6 days, 22 hours, 33 minutes, 16 seconds
2 Online 6 days, 18 hours, 49 minutes, 55 seconds
3 Online 6 days, 18 hours, 49 minutes, 17 seconds
4 Online 6 days, 22 hours, 32 minutes, 49 seconds
5 Online 14 days, 2 hours, 18 minutes, 4 seconds
6 Online 14 days, 2 hours, 17 minutes, 56 seconds
7 Online 14 days, 2 hours, 17 minutes, 47 seconds
8 Online 14 days, 2 hours, 17 minutes, 39 seconds
9 Online 14 days, 2 hours, 17 minutes, 30 seconds
For further description of the command output, see the
Reference.
RELATED DOCUMENTATION
MX2010 Chassis Description | 7
Installing an MX2010 MPC into an Adapter Card | 533
Connecting MPC or MIC Cables to the MX2010 Router | 348
Installing a Cable on an MX2010 MPC or MIC | 445
Uptime
Junos OS System Basics and Services Command
606