Maintaining The Mx2010 Routing Engines - Juniper MX2010 Hardware Manual

State: Online
DC input: OK (INP1 feed expected, INP1 feed connected)
Capacity: 2100 W (maximum 2500 W)
DC output: 269.06 W (Upper Zone, 5.25 A at 51.25 V, 12.81% of capacity)
PSM 17:
State: Online
DC input: OK (INP1 feed expected, INP1 feed connected)
Capacity: 2100 W (maximum 2500 W)
DC output: 281.88 W (Upper Zone, 5.50 A at 51.25 V, 13.42% of capacity)
System:
Upper Zone:
Capacity:
Allocated power:
Actual usage:
Lower Zone:
Capacity:
Allocated power:
Actual usage:
Total system capacity: 18900 W (maximum 22500 W)
Total remaining power: 3380 W
For further description of the command output, see the
Reference.
RELATED DOCUMENTATION
MX2010 Power System Description | 95
Preventing Electrostatic Discharge Damage to an MX Series Router
Troubleshooting the MX2000 Router Power System | 320

Maintaining the MX2010 Routing Engines

Purpose
Each host subsystem comprises a Control Board and Routing Engine (CB-RE) functioning together.
To maintain the host subsystem, check the LEDs (RE0 and RE1) on the craft interface. For more information
about the LEDs and the display, see
10500 W (maximum 12500 W)
7760 W (2740 W remaining)
1370.94 W
8400 W (maximum 10000 W)
7760 W (640 W remaining)
1345.31 W
Junos OS System Basics and Services Command
"MX2010 Craft Interface Description" on page 29.
678