Packing And Returning Components; Guidelines For Packing Hardware Components For Shipment - Juniper MX2010 Hardware Manual

CHAPTER 24

Packing and Returning Components

IN THIS CHAPTER

Guidelines for Packing Hardware Components for Shipment | 693

Packing the MX2010 Router for Shipment | 694
Returning a Hardware Component to Juniper Networks, Inc. | 696
Guidelines for Packing Hardware Components for Shipment
To pack and ship individual components:
When you return components, make sure that they are adequately protected with packing materials
and packed so that the pieces are prevented from moving around inside the carton.
Use the original shipping materials if they are available.
Place individual components in antistatic bags.
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the hardware components.
693