Mx2010 Modular Interface Card Description; Mics Supported By Mx Series Routers - Juniper MX2010 Hardware Manual

RELATED DOCUMENTATION
MX2010 Modular Port Concentrator Description | 70
MX2010 Component LEDs on the Craft Interface | 31
Holding an MX2010 MPC | 688
Troubleshooting the MX2010 MPCs | 726
Replacing an MX2010 MPC and Adapter Card | 525

MX2010 Modular Interface Card Description

The Modular Interface Cards (MICs) install into the Modular Port Concentrators (MPCs) and provide the
physical connections to various network media types. MICs allow different physical interfaces to be
supported on a single MPC. The user can install MICs of different media types on the same MPC as long
as the MPC supports those MICs.
MICs receive incoming packets from the network and transmit outgoing packets to the network. During
this process, each MIC performs framing and high-speed signaling for its media type.
MICs are hot-removable and hot-insertable. The user can install up to two MICs in each MPC.
RELATED DOCUMENTATION
MX2010 Modular Interface Card LEDs | 90
Maintaining MX2010 MICs | 651
Troubleshooting the MX2010 MICs | 725
Replacing an MX2010 MIC | 515

MICs Supported by MX Series Routers | 79

MICs Supported by MX Series Routers
The following tables list the first supported Junos OS release for the MX Series.
Table 25 on page 80 lists the first supported Junos OS release for MICs on MX240, MX480, MX960,
and MX2008 routers.
Table 26 on page 82 lists the first supported Junos OS release for MICs on MX2010 and MX2020
routers.
79