Storing An Mx2010 Mpc - Juniper MX2010 Hardware Manual

Universal routing platform

Hide thumbs Also See for MX2010:

Table of Contents

If you must rest the MPC temporarily on an edge while changing its orientation between vertical and

horizontal, use your hand as a cushion between the edge and the surface.

Storing an MX2010 MPC | 690

Troubleshooting the MX2010 MPCs | 726

Replacing an MX2010 MPC and Adapter Card | 525

Storing an MX2010 MPC

You must store an MPC as follows:

In the router

In the container in which a spare MPC is shipped

Horizontally and sheet metal side down

When you store an MPC on a horizontal surface or in the shipping container, always place it inside an

antistatic bag. Because the MPC is heavy, and because antistatic bags are fragile, inserting the MPC into

the bag is easier with two people. To do this, one person holds the MPC in the horizontal position with

the faceplate facing the body, and the other person slides the opening of the bag over the MPC connector

If you must insert the MPC into a bag by yourself, first lay the MPC horizontally on a flat, stable surface,

sheet metal side down. Orient the MPC with the faceplate facing you. Carefully insert the MPC connector

edge into the opening of the bag, and pull the bag toward you to cover the MPC.

Never stack an MPC under or on top of any other component.

Table of Contents