Removing The Center-Mounting Brackets From The Chassis; Figure 35: Installing The Mounting Hardware For An Open-Frame Rack - Juniper T4000 Hardware Manual

T4000 Router Hardware Guide

Removing the Center-Mounting Brackets from the Chassis

72
Partially insert screws into the open holes in the flanges of the large shelf.
3.
Tighten all the screws completely.
4.

Figure 35: Installing the Mounting Hardware for an Open-Frame Rack

Before front-mounting the router in an open-frame rack, you must remove the
center-mounting brackets from the chassis.
To remove the center-mounting brackets (see
Loosen the screws at the top and bottom of each bracket.
1.
Remove each bracket.
2.
Figure 36 on page 73):
Copyright © 2013, Juniper Networks, Inc.