To Connect The Emulation Probe To A Power Source - Agilent Technologies E5900B User Manual

WARNING:
CAUTION:
1 Install the ferrite on the 12V power cord, near the end which plugs into
2 Connect the power cord to the power supply and to a socket outlet.
3 Connect the 12V power cord to the back of the emulation probe.
Ferrite
4 Turn on the emulation probe power switch.
Using the Emulation Probe

To connect the emulation probe to a power source

To connect the emulation probe to a power
source
The emulation probe is shipped from the factory with a power supply and cord
appropriate for your country. If the cord you received is not appropriate for
your electrical power outlet type, contact your Agilent Technologies sales and
service office.
Use only the supplied Agilent F1044B power supply and cord. Failure to use
the proper power supply could result in electric shock.
Use only the supplied Agilent power supply and cord. Failure to use the
proper power supply could result in equipment damage.
the emulation probe.
74 Emulation for the Motorola M•CORE