Front Internal Gear and Overrun Clutch
Assemble
Reference: "Front Internal Gear Cleaning and
Inspection".
1. Install the front internal gear flange (527).
2. Install the front internal gear flange retaining ring
(528).
3. Install the overrun clutch assembly (523) into the
front internal gear.
Automatic Transmission:
4. Hold the front internal gear and inspect the
movement of the overrun roller clutch. The inner
race should turn freely counterclockwise (1) and
should lock clockwise (2).
Reference: "Front Internal Gear and Low and Reverse
Clutch Installation".
Front Internal Gear and Low and Reverse
Clutch Installation
Reference: "Front Internal Gear and Overrun Clutch
Assemble".
Special tool
J 28585 Snap Ring Remover
1. Install the front internal gear thrust washer race
(530) on top of the output gear assembly.
2. Install the front internal gear thrust bearing assembly
(519) on top of the front internal gear thrust washer
race (530).
5A-265