Table of Contents
Advertisement
5A-308 Automatic Transmission:
4. Apply J 36850 to the second coast clutch hub thrust
washer (501).
5. Align the tab of the washer with the hollow of the
second coast clutch hub (500).
6. Install the second coast clutch hub thrust washer
(501) onto the second coast clutch hub (500).
7. While turning the second coast clutch hub (500)
clockwise, slide it into the second clutch sprag outer
race assembly (505).
8. Hold the second clutch sprag outer race assembly,
and inspect that the second coast clutch hub turns
freely clockwise (2) and locks counterclockwise (1).
If the hub does not turn clockwise turn the sprag race
assembly over.
9. Install the second clutch sprag outer race thrust
washer (506) aligning the tabs with the hollow of the
second clutch sprag outer race assembly (505).
Reference: "Fluid Pump Installation".
Fluid Pump Installation
Reference: "Second Coast Clutch Piston Travel
Measurement".
Reference: "Second Coast, Second Clutch Hub and
Second Clutch Sprag Assemble".
Special tool
J 36850 Transjel Lubricant
J 45053 Universal Clamp Press
1. Apply J 36850 to the coast clutch hub thrust washer
(226).
2. Install the coast clutch hub thrust washer (226) with
the flat surface facing up, and with the tangs
engaged into the second coast clutch spring (224).
Advertisement
Table of Contents
Troubleshooting
