Suzuki XL7 2007 Service Manual page 1646

5A-236 Automatic Transmission:
Control Valve Body Assembly Removal
Reference: "Wiring Harness Removal".
1. Place the transmission in Neutral (N).
2. Remove the 2 control valve body bolts/screws (30),
control valve body fluid passage cover (37) and
gasket (38).
3. Remove the six 10 mm control valve body mounting
bolts/screws (1-6).
4. While holding the control valve body assembly,
disconnect the manual shift detent lever assembly
(710) from the manual valve link (336).
5. Move the detent lever assembly to the neutral
position for ease of removing the manual valve.
6. Remove the control valve body assembly (39).
7. Remove the 2 case fluid passage seals (86).
Reference: "Control Valve Body Assembly
Disassemble".