Table of Contents
Advertisement
6C-22 Power Assisted Steering System:
5. Install the front tire/wheel assemblies. Refer to "Tire
and Wheel Removal and Installation: ".
6. Fill and bleed the power steering system. Refer to
"Power Steering System Bleeding".
Steering Gear Replacement
Removal Procedure
1. Disconnect the rack and pinion outer tie rods from
the steering knuckles. Refer to "Rack and Pinion
Outer Tie Rod End Replacement".
2. Remove the intermediate steering shaft lower bolt.
Refer to "Intermediate Steering Shaft Replacement:
".
3. Place drain pans under the vehicle as needed.
4. Remove the transaxle mount bolt (1).
5. Remove the transaxle mount bolts (1) and position
the transaxle mount aside.
NOTE
Do not reuse the old O-Ring seals.
6. Disconnect the power steering gear inlet hose (2)
and the power steering cooler hose (1) from the
power steering gear.
7. Remove the power steering gear hoses bracket bolt
(1).
Advertisement
Table of Contents
Troubleshooting
