Suzuki XL7 2007 Service Manual page 1694

5A-284 Automatic Transmission:
Transmission Case Cover and 1-2 Reverse
Clutch Assembly Installation
Reference: "Forward and Direct Clutch End Play
Measurement".
1. Remove any sealant and automatic transmission
fluid from the contacting surfaces of the transmission
case cover and the transmission case.
NOTE
Do not get any fluid on the contacting
surfaces of the transmission case cover or
the transmission case.
2. Apply a 3 mm (1/8 in) bead of sealant GM P/N
89020326 (Canadian P/N 89021188), to the
transmission case cover.
3. Install the transmission case cover assembly (19)
onto the transmission case assembly (17).
4. Apply threadlocker GM P/N 12345382 (Canadian P/
N 10953489), to the threads of all the case cover
bolts.
5. Install 7 - M8 x 1.25 x 30 mm bolts (20) and hand
tighten.
6. Install 1 - M8 x 1.25 x 45 mm bolt (22) and hand
tighten.
7. Install 2 - M8 x 1.25 x 48 mm bolts (21) and hand
tighten.
8. Install 1 - M8 x 1.25 x 30 mm/M6 x 1.0 x 10 mm
double stud (74) and hand tighten.
9. Install 1 - M8 x 1.25 x 78 mm bolt (77) and hand
tighten.
CAUTION
!
Refer to "Fastener Notice: ".