Suzuki XL7 2007 Service Manual page 1735

12. Install the reverse shift restrict ball check valve
bushing - inner (451).
13. Install the reverse shift restrict ball check valve
(452).
14. Install the reverse shift restrict ball check valve
bushing - outer (453).
15. Install the sleeve/bore plug retainer (459).
16. Install the 2 accumulator check valve assemblies
(353).
17. Install the TCC check valve spring (449).
18. Install the TCC check valve (450).
Reference: "Control Valve Body Assembly Assemble".
Automatic Transmission:
Control Valve Front Body Disassemble
Reference: "Control Valve Body Assembly
Disassemble".
WARNING
!
Valve springs can be tightly compressed.
Use care when removing retainers and plugs.
Personal injury could result.
1. Remove the gasket (322).
2. Remove the front control valve body spacer plate
(321).
3. Remove the gasket (320).
4. Remove the ball check valve (355).
5. Remove the fluid strainer (352).
6. Remove the pressure relief valve (351).
7. Remove the pressure relief valve spring (350).
8. Remove the 2 check valves (360).
9. Remove the 2 check valve compression springs
(361).
5A-325