Table of Contents
Advertisement
5A-298 Automatic Transmission:
WARNING
!
Wear safety glasses when using compressed
air in order to prevent eye injury.
7. While pulling upward on the piston by hand, apply
compressed air into the fluid passage in the fluid
pump assembly and remove the second coast clutch
piston (222).
8. Remove the inner seal (221) and the outer seal
(223) from the second coast clutch piston (222).
Reference: "Second Clutch Disassemble".
Second Clutch Disassemble
Reference: "Second Coast Clutch Disassemble".
Special tool
J 28585 Snap Ring Remover
1. Using J 28585 remove the second clutch backing
plate retaining ring (220) from the fluid pump
assembly.
2. Remove the second clutch backing plate (219).
3. Remove the 4 fiber plates (217).
4. Remove the 4 steel plates (218).
5. Remove the second clutch spring assembly (215).
Advertisement
Table of Contents
Troubleshooting
