5A-300 Automatic Transmission:
5. Using a feeler gage, measure between the fluid
pump drive gear (205) teeth and the crescent
shaped part of the fluid pump body (202).
Specification
Drive gear tip to body clearance: 0.013 - 0.342
mm (0.0005 - 0.014 in)
6. Using a feeler gage, measure between the fluid
pump driven gear (204) teeth and the crescent
shaped part of the fluid pump body (202).
Specification
Driven gear tip to body clearance: 0.004 - 0.298
mm (0.0001 - 0.618 in)
7. Using a steel straight edge and a feeler gage,
measure the side clearance of both fluid pump gears
in relationship to the fluid pump body.
Specification
Side clearance of drive and driven gear to body:
0.03 - 0.10 mm (0.0012 - 0.004 in)
8. If any of the above measurements are not within
specifications, replace the fluid pump assembly.
9. Remove the fluid pump drive gear (205) and the fluid
pump driven gear (204).