Table of Contents
Advertisement
5A-198 Automatic Transmission:
Transmission Control Lever Knob Replacement
Callout
Shift Control Knob Boot.
Tip:
1
1. Depress the sides of the boot in order to release the boot from the instrument panel lower brace
bezel.
2. Lift the boot up in order to access the shift control knob screw.
Shift Control Knob Screw.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and Notices.
2
Tightening torque
Tighten the screw to 1.5 N⋅m (13 lb in).
Tip: Loosen the shift control knob screw approximately 4-5 turns. It is not necessary to fully remove the
screw from the shift control knob.
Shift Control Knob.
3
Tip: Remove the shift control boot if replacing the knob. Refer to"Transmission Control Boot
Replacement".
Component Name
Advertisement
Table of Contents
Troubleshooting
