Suzuki XL7 2007 Service Manual page 1742

5A-332 Automatic Transmission:
NOTE
• Use NEW O-ring seals.
• Do not damage the O-ring seals.
23. Replace the O-ring seals (306) on each of the 5 shift
solenoid valves (300, 303, 305, 308, 310).
24. Install the 5 shift solenoid valves (300, 303, 305,
308, 310).
25. Install the 5 shift solenoid valve retaining bolts.
– 1 - (301) - M5 x 0.8 x 62 mm
– 2 - (302) - M5 x 0.8 x 28 mm
– 2 - (307) - M5 x 0.8 x 10 mm
26. Tighten the 5 shift solenoid valve retaining bolts
(301, 302, 307).
Tightening torque
Tighten the shift solenoid valve retaining bolts to
7 N⋅m (62 lb in).
27. Install the line pressure control solenoid valve
assembly (316) and the shift pressure control
solenoid valve assembly (340).
28. Install the control valve body solenoid valve retainer
(312) and 1 - M5 x 0.8 x 13 mm control valve body
bolt (311).
Tightening torque
Tighten the control valve body bolt to 7 N⋅m (62
lb in).
29. Install the TCC lock up pressure control solenoid
valve assembly (339).
30. Install the TCC lock up pressure control solenoid
valve retainer (319), the wiring harness clip (318),
and 1 - M5 x 0.8 x 10 mm control valve body bolt/
screw (307).
Tightening torque
Tighten the control valve body bolt to 7 N⋅m (62
lb in).
31. Install the manual valve (337) into the middle control
valve body assembly.
Reference: "Control Valve Body Assembly Installation".