Suzuki XL7 2007 Service Manual page 1587

No 1-2 Upshift
Checks
DEFINITION: No first gear to second gear upshift
External Automatic Transmission Control Valve Body Assembly (39)
• Reverse, 1st Shift Solenoid Valve
Assembly (S1) (310)
• 2--3, 3-4 Shift Solenoid Valve
Assembly (S2) (308)
• 1-2, 2-3, Reverse Shift Solenoid
Valve Assembly (S3) (300)
• 3-4, 4-5 Shift Solenoid Valve
Assembly (S4) (303)
Internal Automatic Transmission Control Valve Body Assembly (39)
• M1 Shift Valve (389)
• M2 Shift Valve (426)
• U1 Shift Valve (386)
• U2 Shift Valve (392)
Clutch - Mechanical/Hydraulic
• Second Clutch Assembly (209-
220)
• 2nd Coast Clutch and 2nd Clutch
Hub and 2nd Clutch Sprag
Assembly (11)
No 2-3 Upshift
Checks
DEFINITION: No second gear to third gear upshift
External Automatic Transmission Control Valve Body Assembly (39)
• 2--3, 3-4 Shift Solenoid Valve
Assembly (S2) (308)
• 1-2, 2-3, Reverse Shift Solenoid
Valve Assembly (S3) (300)
• 3-4, 4-5 Shift Solenoid Valve
Assembly (S4) (303)
Internal Automatic Transmission Control Valve Body Assembly (39)
• M1 Shift Valve (389)
• M2 Shift Valve (426)
• U1 Shift Valve (386)
• U2 Shift Valve (392)
Clutch - Mechanical/Hydraulic
• 4-5 Clutch Assembly (15)
• 3rd Gear Band Assembly (16)
Verify that all solenoids respond electrically. If there is no response, perform an
electrical diagnosis. If there are no electrical concerns, remove the solenoid
valve assemblies as needed, and inspect the solenoid O-ring seals, and the
solenoid bores for signs of damage and/or missing seals. If the solenoid valves
responded electrically and there are no bore or seal concerns, replace the
solenoid valve assemblies as necessary due to possible internal mechanical
concerns and retest. If a condition is still present after replacing the solenoid
valve assembly, replace the complete automatic transmission control valve
body assembly (39).
Remove the automatic transmission control valve body assembly (39) and
inspect the items listed. Inspect the internal bores and the valves for signs of
wear and/or damage, including internal contamination. If unable to verify any
repairable concerns, replace the complete automatic transmission control valve
body assembly (39).
Remove the torque converter assembly (1) and the fluid pump assembly (2) in
order to inspect the second clutch assembly (209-220) and the 2nd coast clutch
and 2nd clutch hub and 2nd clutch sprag assembly (11). Inspect all related
components for proper operation. Repair or replace as necessary.
Verify that all solenoids respond electrically. If there is no response, perform an
electrical diagnosis. If there are no electrical concerns, remove the solenoid
valve assemblies as needed, and inspect the solenoid O-ring seals, and the
solenoid bores for signs of damage and/or missing seals. If the solenoid valves
responded electrically and there are no bore or seal concerns, replace the
solenoid valve assemblies as necessary due to possible internal mechanical
concerns and retest. If a condition is still present after replacing the solenoid
valve assembly, replace the complete automatic transmission control valve
body assembly (39).
Remove the automatic transmission control valve body assembly (39) and
inspect the items listed. Inspect the internal bores and the valves for signs of
wear and/or damage, including internal contamination. If unable to verify any
repairable concerns, replace the complete automatic transmission control valve
body assembly (39).
• Inspect the 3rd gear band servo piston assembly (57) for signs of internal
binding, internal contamination, and/or missing parts. If the servo assembly
was found to be binding in the transmission case bore, it is possible that there
is damage to the 3rd gear band assembly (16). The 3rd gear band assembly
(16) should be physically inspected to verify proper operation.
• Remove the automatic transmission case cover and 1-2 reverse clutch
assembly (19), and the 1-2 reverse carrier gear assembly (18) in order to
inspect the 3rd gear brake band assembly (16). Inspect all related
components for proper operation. Repair or replace as necessary.
Automatic Transmission:
Actions
Actions
5A-177