Table of Contents
Advertisement
5A-270 Automatic Transmission:
WARNING
!
Wear safety glasses when using compressed
air in order to prevent eye injury.
9. Install the forward and direct clutch housing
assembly with input shaft (567) onto the
transmission case cover (19).
10. While pulling on the piston by hand, apply
compressed air into the fluid passage (C2) in order
to remove the direct clutch piston (562).
11. Remove the direct clutch piston inner seal (561) and
the direct clutch piston outer seal (563) from the
direct clutch piston (562).
WARNING
!
Wear safety glasses when using compressed
air in order to prevent eye injury.
12. While pulling upward on the piston by hand, apply
compressed air into the fluid passage (C1) in order
to remove the forward clutch piston (565).
13. Remove the forward clutch piston inner seal (564)
and the forward clutch piston outer seal (566) from
the forward clutch piston (565).
Reference: "Forward and Direct Clutch Assembly
Assemble".
Advertisement
Table of Contents
Troubleshooting
