Table of Contents
Advertisement
1. Remove the vent hose (814).
2. Remove the transmission vent pipe (812).
3. Install the body of the DT-48355 with the two long
bolts (1) to the transaxle.
4. Loosely install the arm and bolt (2) to the DT-48355
body.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
5. Install the arm with the provided shorter bolt (3) to
the transaxle.
Tightening torque
Tighten the DT-48355 to 25 N⋅m (18 lb ft) starting
with bolt (3).
6. Install the DT-48355 in the J 3289-20.
Automatic Transmission:
Transmission Fluid Draining
Reference: "Holding Fixture Installation".
1. Place a suitable fluid collection pan under the
transmission assembly.
2. Remove the drain plug.
3. Remove the gasket (820) from the drain plug (819).
4. Drain the automatic transmission fluid into the
collection pan.
5. Remove the collection pan and properly dispose of
the transmission fluid.
6. Remove the bolt (825) for the transmission level
indicator.
7. Remove the transmission oil level indicator (823)
and the O-ring (824).
5A-233
Advertisement
Table of Contents
Troubleshooting
