Suzuki XL7 2007 Service Manual page 1683

e. Use J 28585 (3) or snap ring pliers to install the
retaining ring.
f. Remove the tools.
NOTE
Make sure the direct clutch apply plate is
facing the correct direction.
21. Install the direct clutch apply plate (558). The plate is
convex shaped.
22. Install the 4 direct clutch steel plates (557) and the 4
direct clutch fiber plates (556).
23. Install the direct clutch backing plate (555).
NOTE
Make sure that the end gap of the direct
clutch backing plate retaining ring (554) is
not aligned with any of the cut-outs.
24. Install the direct clutch backing plate retaining ring
(554) into the groove in the forward and direct clutch
housing assembly - with input shaft (567) using J
28585.
Automatic Transmission:
25. Install the 4 forward clutch steel plates (553) and the
4 forward clutch fiber plates (552).
26. Install the forward clutch backing plate (551).
NOTE
Make sure that the end gap of the forward
clutch backing plate retaining ring (550) is
not aligned with any of the cut-outs.
27. Install the forward clutch backing plate retaining ring
(550) into the groove in the forward and direct clutch
housing assembly - with input shaft (567) using J
28585.
5A-273