Suzuki XL7 2007 Service Manual page 1727

24. Install the U2 shift valve (392).
25. Install the U2 shift valve spring (393).
26. Install the U2 shift valve bore plug (394).
27. Install the sleeve/bore plug retainer (362).
28. Install the primary regulator valve (395).
29. Install the primary regulator valve spring (396).
30. Install the primary regulator valve plunger (397).
31. Install the primary regulator valve sleeve (398).
32. Install the sleeve/bore plug retainer (362).
Automatic Transmission:
33. Install the 5 accumulator check valve assemblies
(353).
34. Install the cooler by-pass valve spring (380).
35. Install the cooler by-pass valve (381).
36. Install the TCC check valve spring (383).
37. Install the TCC check valve (382).
Reference: "Control Valve Body Assembly Assemble".
Control Valve Rear Body Disassemble
Reference: "Control Valve Body Assembly
Disassemble".
WARNING
!
Valve springs can be tightly compressed.
Use care when removing retainers and plugs.
Personal injury could result.
1. Remove the spacer plate and gasket assembly (324)
from the rear control valve body assembly (326).
5A-317