Suzuki XL7 2007 Service Manual page 1737

Control Valve Front Body Assemble
Reference: "Control Valve Front Body Disassemble".
1. Inspect the front control valve body (345) casting for
the following conditions:
– Porosity
– Cracks
– Damaged machine surface
– Chips or debris
– Damage to valve bores
2. Inspect all valves, springs, bushings, and clean all
components in clean solvent.
3. Install the solenoid modulator valve (346).
4. Install the solenoid modulator valve spring (347).
5. Install the solenoid modulator valve bore plug (348).
6. Install the sleeve/bore plug retainer (349).
Automatic Transmission:
7. Install the second coast clutch (B1) control valve
spring (358).
8. Install the second coast clutch (B1) control valve
(359).
9. Install the solenoid modulator valve bore plug (348).
10. Install the sleeve/bore plug retainer (349).
11. Install the neutral relay valve (356).
12. Install the neutral relay valve spring (357).
13. Install the solenoid modulator valve bore plug (348).
14. Install the sleeve/bore plug retainer (349).
5A-327