Table of Contents
Advertisement
10. Tighten the 12 transmission case cover assembly
bolts in sequence.
Tightening torque
Tighten the 12 transmission case cover
assembly bolts to 25 N⋅m (18 lb ft).
Reference: "Third Gear Band Servo Piston Installation".
Third Gear Band Servo Piston Disassemble
Reference: "Third Gear Band Servo Piston Assembly
Removal".
1. Remove the E-clip.
2. Disassemble the third gear band servo piston
assembly.
Automatic Transmission:
3. Measure the free length and the outer diameter of
the outer and inner third gear band servo piston
springs. Refer to 3rd Gear Band Servo (B4) Return
Springs in "Transmission Clearance Specifications".
Reference: "Third Gear Band Servo Piston Assemble".
Third Gear Band Servo Piston Assemble
Reference: "Third Gear Band Servo Piston
Disassemble".
1. Assemble the third gear band servo piston assembly.
2. Apply automatic transmission fluid to the new 3rd
gear band servo piston O-ring seal, and install it into
the groove of the third gear band servo piston.
5A-285
Advertisement
Table of Contents
Troubleshooting
