Suzuki XL7 2007 Service Manual page 1739

CAUTION
!
Refer to "Fastener Notice: ".
3. Install 2 - M5 x 0.8 x 35 mm rear control valve body
bolts (335).
4. Install 1 - M5 x 0.8 x 40 mm rear control valve body
bolt (333).
5. Hand tighten the 3 rear control valve body assembly
bolts (333, 335).
Automatic Transmission:
NOTE
Align each bolt hole on the valve body with
the holes in the gaskets and plates.
6. Install the spacer plate (328) and the 2 new gaskets
(327, 329) onto the No. 2 rear control valve body
assembly (330).
NOTE
Align each bolt hole on the valve body with
the holes in the gaskets and plates.
7. Install the No. 2 rear control valve body assembly
(330) onto the rear control valve body assembly
(326).
5A-329