5A-324 Automatic Transmission:
16. Remove the sleeve/bore plug retainer (459).
17. Remove the second clutch (B2) control valve plug
(448).
18. Remove the second clutch (B2) control valve spring
(447).
19. Remove the second clutch (B2) control valve (446).
Reference: "No. 2 Rear Control Valve Body Assemble".
No. 2 Rear Control Valve Body Assemble
Reference: "No. 2 Rear Control Valve Body
Disassemble".
1. Inspect the No. 2 rear control valve body (445)
casting for the following conditions:
– Porosity
– Cracks
– Damaged machine surface
– Chips or debris
– Damage to valve bores
2. Inspect all valves, springs, bushings, and clean all
components in clean solvent.
3. Install the second clutch (B2) control valve (446).
4. Install the second clutch (B2) control valve spring
(447).
5. Install the second clutch (B2) control valve plug
(448).
6. Install the sleeve/bore plug retainer (459).
7. Install the lock up control valve (454).
8. Install the lock up control valve plunger (455).
9. Install the lock up control valve spring (456).
10. Install the lock up control valve sleeve (457).
11. Install the sleeve/bore plug retainer (458).