Table of Contents
Advertisement
5A-268 Automatic Transmission:
Forward and Direct Clutch Assembly
Disassemble
Reference: "Forward and Direct Clutch Assembly
Removal".
Special tool
J 23327 Clutch Spring Compressor
J 25024-A Servo Piston/Clutch Spring Compressor
J 28585 Snap Ring Remover
J 45186 Forward and Direct Clutch Spring
Compressor
1. Remove the input shaft O-ring seal (570) from the
forward and direct clutch housing assembly - with
input shaft (567).
2. Remove the forward clutch housing thrust bearing
(569) and the forward clutch housing thrust bearing
race (568) from the forward and direct clutch housing
assembly - with input shaft (567).
3. Using J 28585, remove the forward clutch backing
plate retaining ring (550) from the forward and direct
clutch housing assembly - with input shaft (567).
4. Remove the following components from the forward
and direct clutch housing assembly - with input shaft
(567):
– The forward clutch backing plate (551)
– The 4 forward clutch fiber plates (552)
– The 4 forward clutch steel plates (553)
Advertisement
Table of Contents
Troubleshooting
