Suzuki XL7 2007 Service Manual page 1731

8. Install the rear valve body cover plate gasket (418).
9. Install the rear valve body cover plate (417).
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
10. Install the 2 - M5 x 0.8 x 13 mm rear valve body
cover plate bolts (416).
Tightening torque
Tighten the cover plate bolts to 7 N⋅m (62 lb in).
11. Install the third gear band (B4) control valve spring
(422).
12. Install the third gear band (B4) control valve (423).
Automatic Transmission:
13. Install the shift pressure relay valve (424).
14. Install the shift pressure relay valve spring (425).
15. Install the M2 shift valve (426).
16. Install the M2 shift valve spring (427).
5A-321