Suzuki XL7 2007 Service Manual page 1614

5A-204 Automatic Transmission:
9. Using the J 36346, disconnect the shift control cable
from the shift control range select lever pin.
10. Depress the shift control cable retainer clip tabs and
remove the cable from the shift control.
11. Remove the shift control cable grommet from the
cowl.
12. Note the shift control cable routing and remove the
shift control cable from the vehicle.
Installation Procedure
NOTE
Ensure the shift control cable is routed
exactly as originally positioned in the vehicle
to avoid coming into contact with potential
hazards such as hot, sharp, and moving
objects.
1. Secure the shift control cable grommet by pressing
the cable into the pass-thru hole in the cowl.
2. Ensure that the shift control range select lever is in
the park (P) position.
3. Install the shift control cable to the shift control.
4. Install the shift control cable onto the shift control
range select lever pin.
5. Install the console. Refer to "Console Replacement:
".
6. Install the shift control lever knob. Refer to
"Transmission Control Lever Knob Replacement".